Rabljeni strojevi.

Vertikalne tokarilice
 

CNC VTL IVO LOLA RIBAR

1600 mm

Pošalji upit
 

KARUSSEL Drehmaschine Einständer Schiess Froriep MA 80

Manufacturer SCHIESS-FRORIEP
 
Model MA 80
 
Type: MA 80
Retrofit: 1998
TECHNICAL SPECIFICATIONS:
- CNC control: SIEMENS SINUMERIK 840C
 
Main dimensions / travel paths:
* Faceplate diameter: 3,000 mm
* Height base with faceplate: 820 mm
* Distance between table top and floor height: 500 mm
* Workpiece height max .: 1,500 mm
* Swivel range max .: 3,200 mm
 
* Crossbar support right: 1,770 mm
(from the middle of the disc to the right)
* Crossbar support right: 50 mm
(from the middle of the disc to the left)
 
* Adjustment panning max. right
to the right: 30 °
to the left: 30 °
 
* RAM (right) - max. vertical travel: 1,000 mm
* Crossbeams - max. vertical travel: 1,000 mm
 
Speeds, feed and general data:
Faceplate and main drive:
Speeds for face plate:
* Speed ​​range I: 0.8-6.3-20 rpm
* Speed ​​range II: 3.15-25-80 rpm
* Characteristic speed: 6.3 rpm
* Speeds main drive motor: 100-800-2,500 rpm
* Max. Load on faceplate: 20 t
 
* Cutting speed:
Workpiece dimensions D 3.200 mm / d 500 mm: 35.5 m / min (gear stage II)
 
Transom Support:
Feed speed, vertical and horizontal
* Fine feed: 0.1 - 3.000 mm / min
* Cross section RAM: 240 x 240 mm
* Drilling diameter min .: 300 mm
* Max. Cross section tool shank: 40 x 40 mm
* Max. Cutting force at travel 1/3
of total travel: 50 kN
 
Transom:
* Travel speed: 500 mm / min
* Gradual height adjustment: 50 mm
Bel9mjf0bp
 
Main drive:
* Main propulsion engine power: 9.4-75-75 kW
at a speed of: 100-800-2,500 rpm
* Max. Torque of the faceplate: 100,000 Nm
 
Electric power supply:
* Voltage: 440 V, 50 Hz
* Total connected load: 170 kVA
* Required protection: 250 A
 
Domestic equipments:
* Full housing
* Chip conveyor
* Documentation
Pošalji upit
 

VTL SEDIN 1512

konvencionalna vertikalna tokarilica

promjer strola 1120mm

promjer maksimalnog tokarenja 1250

težina stroja 16500 kg

100% radno stranje

Pošalji upit
 

FMUAB konvencionalna vertikalna tokarilica

promjer vrtnje 1100

Pošalji upit
 

VTL 1525

issue 1985
Condition good

Pošalji upit
 

Karusel Sedin 1525

- stol: 2250 mm
- dia.: 2500 mm
- visina: 1600 mm
- digitalne letve 2 osi

Pošalji upit
 

Sedin 1525

Double Column Vertical Lathe
Year of manufacture: 1990
Year of revision: 2008; Revised mechanical parts, NEW electrical unit.
Condition: Very good working condition; Actually working in our warehouse.

Technical details
Table diameter: 2250 mm
Distance between table and ram 0 - 1780 mm
Distance between table and lower surface of trasversal beam 400 - 1640 mm

Workpiece
Max workpiece diameter 2500 mm
Max workpiece high 1600 mm
Max workpiece weight : 11 400 kg

Carriage
Carriages n.: 2 pcs ( both ram type )
Max ram travel: 1200 mm
Max horizontal travel of carriage: 1390 mm
Max swivel angle 30 degrees
Max distance between axis of ram 560 mm

Mechanical unit
Table speeds number 18
Table speeds range 1.6 - 80 rpm

Motors and overall dimensions
Main motor 40 kW , 1500 rpm
Dimensions : 5065 x 5280 x 4910 mm
Machine weight 35 500 kg

Pošalji upit
 

VTL 1525

issue 1991

Pošalji upit
 

VTL Niles

Needed floor space
- Length: +/- 5.5 m
- width: +/- 4.5 m
- Height: +/-4.5 m

- table diam: 2000 mm
- max turnable diam: +/- 2650 -2700 mm
- max turnable height: 1400 mm
- speed: 1 to 31 rpm

Pošalji upit
 

VTL Stanko 1512 CNC II

Borer Vertical/VTL Turret CNC
Make: Stanko CNC Vertical Lathe
Model: 1512F3 - CNC Borer SIEMENS 802C - Excellent

Description
Feedings range:
1 - 300 mm/min
0,01 40 mm/rev
Fast stroke: 6000 mm/min

Accessories: Turret head, set of jaws
Rettrofitting 2007/2008/as shown on the pictures
-Mechanical revising
Max strokes:
- horizontal: 775 mm
- vertical: 700 mm

Specs
Max turning dia: 1 250 mm
Max turning height: 1 000 mm
Max workpiece weight: 4 000kg
Faceplate dia: 1120 mm
Faceplate speed range:
2 range 1-62 rpm
22 range 5-250 rpm
Main motor AC: 30 kW
Weight about: 15 500 kg

Controller: CNC Siemens 802C

Pošalji upit
 

VTL STANKO 1512 CNC III

Type:
Make:
Model:

Description
Feedings range:

Fast stroke:
Accessories:
Turret head, set of jaws
Rettrofitting 2007/2008/as shown on the pictures:
Max strokes:

Specs:
Max turning dia:
Max turning height:
Max workpiece weight:
Faceplate dia:
Faceplate speed range:

Main motor AC:
Weight about:

   

Borer Vertical/VTL Turret CNC
Stanko CNC Vertical Lathe
1512F3 - CNC Borer SIEMENS 802C - Excellent


1 - 300 mm/min
0,01  40 mm/rev
6000 mm/min
Turret head, set of jaws
Mechanical revising
horizontal: 775 mm
vertical: 700 mm
1 250 mm
1 000 mm
4 000kg
1120 mm
2 range  1-62 rpm
22 range  5-250 rpm
30 kW
15 500 kg
Pošalji upit
 

SEDIN 1510

- dia.: 1000 mm
- digitalne letve: ISKRA

Pošalji upit
 

VTL STANKO 1512 CNC

Type: Borer Vertical/VTL Turret CNC
Make: Stanko CNC Vertical Lathe
Model: 1512F3
Feedings range:
- 1 - 300 mm/min
- 0,01 40 mm/rev
Fast stroke: 6000 mm/min
Accessories:
- Turret head, set of jaws
- Rettrofitting 2007/2008/as shown on the pictures
- Mechanical revising
Max strokes:
- horizontal: 775 mm
- vertical: 700 mm
Specs:
- Max turning dia: 1 250 mm
- Max turning height: 1 000 mm
- Max workpiece weight: 4 000kg
- Faceplate dia: 1120 mm
Faceplate speed range:
- 2 range 1-62 rpm
- 22 range 5-250 rpm
Main motor AC: 30 kW
Weight about: 15 500 kg

Pošalji upit