JT-TL510
High-speed CNC Drilling Center
Straight type 20000rpm spindle.
60m/min rapid position and 1.2G acceleration.
1.9S tool-to-tool changing speed.
Oil-water separation/rear-flushing for chip removal.
High machining efficiency and rapid milling, dripping and tapping.
1. Straight type 20000rpm spindle
2. 60m/min rapid positioning and 1.2G acceleration
To greatly reduce the machining time and effectively increasing the machining efficiency.
3. 1.9S tool-to-tool changing speed
With the stable, reliable, rapid, simple and efficiency ATC changing system, the tool can be changed stably and reliably, and the non-machining tool can be reduced.
4. Z-axis protective cover
With the unique Z-axis protective cover, the Z-axis transmission system can be effectively protected, and the rapid displacement on the Z axis can be made steady and smooth.
Overall casting
The bearing seat and motor seat are cast with the bed body into a whole. The saddle and nut retainers are cast into a whole.
Overall casting
The bearing seat and motor seat are cast with the bed body into a whole. The saddle and nut retainers are cast into a whole.
16T tool magazine
Table bottom structure
Artificial shovel type pattern made by Taiwan master
Sheet metal-embedded leakage-proof design
Technical Highlights
Straight type spindle transmission
Sensitive response, full-power operation, no power loss or noise of the belt, rigid tapping and no drive back gap.
Automatic lubrication system
Use the central lubrication system to lubricate the elements of the transmission system and ensure the accuracy. When the suspension time of the transmission system
Overall casting
Automatic lubrication system
Use the central lubrication system to lubricate the elements of the transmission system and ensure the accuracy. When the suspension time of the transmission system reaches the preset time, the transmission system will stop oil supply to save the energy.
Air compressor system
The air compressor unit is capable of detecting the pressure. In case of insufficient pressure, the system will send the alarm message to ensure normal operation of the mechanism.
Optional fourth axis
The fixture on the fourth axis is provided with the special tail seat support to enlarge the machining space between the fixture and workpiece.
Safety door
By means of signal detection, the machine tool will stop working if the door is opened during machining, thereby effectively ensuring the operational safety.
FANUC servo system
Motor with rear tool magazine
High rigidity and small size
The unique design meets the high rigidity requirement. Due to the small size, the limited workshop space can be used to the largest extent, reducing the customer investment in the workshop.
Automatic lubrication system
Use the central lubrication system to lubricate the elements of the transmission system and ensure the accuracy. When the suspension time of the transmission system
Overall Dimensions
Automatic lubrication system
Use the central lubrication system to lubricate the elements of the transmission system and ensure the accuracy. When the suspension time of the transmission system
Aluminum Alloy Drilling Test and Parameters
| Item | Tool | Speed | Feed F | Depth Z | Drilling Depth | Number of Holes | Time (s) | Efficiency (s/hole) | |
| M2 | Bottom hole | 1.7 high cobalt drill | 6700 | 1300 | 10 | 10 | 10 | 16 | 1.6 |
| Tapping | M2 tap | 3000 | 1200 | 8 | 8 | 10 | 29 | 2.9 | |
| M3 | Bottom hole | 2.6 high cobalt drill | 6600 | 2000 | 15 | 15 | 10 | 19 | 1.9 |
| Tapping | M3 tap | 3000 | 1500 | 12 | 12 | 10 | 30 | 3 | |
| M4 | Bottom hole | 3.5 high cobalt drill | 6400 | 2000 | 20 | 20 | 10 | 20 | 2 |
| Tapping | M3 tap | 3000 | 2100 | 15 | 15 | 10 | 28 | 2.8 | |
Parameters
| Item | Unit | Model | |||||
| TL510 | TL510A | TL510B | TL510C | ||||
| Table | Table size | mm | 610 x 400 | 650 x 400 | |||
| T-slot | Number x Width x Distance | 3 x 14 x 100 | |||||
| Max.loading capacity | kg | 250 | |||||
| Travel | X/Y/Z-axis travel | mm | 510/400/350 | ||||
| Distance from spindle nose to table surface | mm | 100-450 | |||||
| Distance from spindle center to column | mm | 450 | |||||
| Spindle | Spindle speed | rpm | 15000/20000 | 30000 | |||
| Spindle taper | BT30 | BBT30 | |||||
| Feed | Rapid traverse rate (X/Y/Z-axis) |
mm/min | FANUC: 60000/60000/60000 MITSUBISHI: 60000/60000/48000 |
60000/60000/48000 | |||
| Cutting feed rate | mm/min | 1-10000 | |||||
| Accuracy | Positioning accuracy (JIS6336-2) | mm | ±0.005 | 0.01 | |||
| Repeatablity accuracy (JIS6336-2) | mm | ±0.003 | 0.006 | ||||
| Automatic Tool Changer/ATC | Tool storage capacity | T | 16 (Radiation type) | 12 (Radiation type) | |||
| Max.tool diameter | mm | φ80 | |||||
| Max. tool length | mm | 200 | |||||
| Max. tool weight | kg | 3 | |||||
| Tool changing time(T-T) | s | 1.4 | 1.9 | ||||
| System | CNC system | FANUC 0i Mate MD/MITSUBISHI M70VBS | FANUC Oi MF/ MITSUBISHIM80 | ||||
| Others | Spindle motor power | kw | FANUC: 3.7 MITSUBISHI: 5.5 | FANUC: 2.2 MITSUBISHI: 3.7 | |||
| X/Y/Z three-axis motor torque | N•m | FANUC: 8/8/12 MITSUBISHI: 9/9/22.5 | |||||
| Power supply | 3Ф380V/50HZ/12KVA | ||||||
| Air pressure required | kg/cm² | 6.5 | 5.5-6.5 | ||||
| Machine weight | kg | 2500 | 3000 | 3200 | 2800 | ||
| Machine dimensions (length x width x height) |
mm | 1550 x 2600 x 2800 | 1670 x 2600 x 3000 | 1840 x 2290 x 2645 | 1840 x 2494 x 2500 | ||